- Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols. This plate also fits Taurus G3 with Original Rear sight(see photo)
- Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
- 6 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W
- Shock proof，Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
- Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- Taurus is a registered trademarks belong to their respective owner. This optic plate for Taurus is made by ADE to connect optics to Taurus pistols. ADE is not affiliated with Taurus.
- Starting 2024, this red dot will be shipped with the Motion Activated System. While the red dot is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Users also have the option to manually turn the red dot power off to disable the Motion Activated System.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Picatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
27 Reviews Hide Reviews Show Reviews
-
5.0 out of 5 stars Works great
Fits a tx22 (1st generation) perfectly. Easy install. Easy to zero using barrel site laser. After 500 rounds, holding zero . Too bad they don’t make one for 2nd generation.
-
Crappy location for power button
Works great, looks great, hate where the power button is.
-
Counter-sunk Single-point, Phillips-head could be an issue on the G2C rear sight mount installation.
The ADE RD3-006A1 GREEN DOT sight, itself, appeared fairly accurate and the overall installation was fairly easy in accordance with the provided instructions, including removal of the Picatinny mounting plate. The issues encountered came with: 1) Not holding zero: Upon checking that the Optic was securely in place, after installing the "anti-vibration shim between the EPS and the G2C mount plate (according to the instructions) the forward section of the sight still had a slight "left and right" movement once secured and torqued in place. This occurred even after even after the G2C plate (single-point) Phillips head mounting screw had been torqued to the required 12 in./lbs. Holding Zero under these circumstances is highly questionable. 2) Removing the device resulted, in difficulty in removing the pistol optic plate. The single point, counter-sunk Phillips head screw, almost started to "strip" during extraction. Care had to be exercised by every-so-slowly turning the screw to finally remove it. 3) The G2C mount plate was not a "press fit" or "snug fit" into the G2C rear sight mount. It appeared fairly loose! 4) Finally, the response as to why someone might see a "splashed dot, or Starburst was spot on!
-
For beginners
If you know how to order replacement screws for the plate(smallest order is 50), use loctite and never edc with it, it’ll last forever. Holding zero is out of the question, best for plinking. Best for beginners that are learning maintenance habits before getting that sig sauer conversation piece. On/off/cycle button becomes unreliable after a couple years. You get what you pay for, for the price I was impressed. Maintenance and abuse are the determining factors.
-
Customer Service was awesome!
Small screw to hold mounting plate stripped out. Called and they sent me 2 at no charge plus free shipping. Communication was excellent!
-
So far so good
Very bright easy to adjust
-
Great product
This product fits perfectly onto my Taurus G3 and it works like a charm.
-
Nice
Instructions was clear. Fit nice on my g2c. Would recommend
-
Easy to install
I will definitely buy other attachments from this seller. I love how they provided everything necessary to install this piece. Even down to the instructions were spot on. I had never did this before but it was easy to do. It also beat paying a gun shop $30 to put it on!
-
Great product
This optic works very well and holds zero if installed and used properly. I was able to zero it in at 30 feet with only 3 shots and it held that exact point of impact for over 300 rounds of shooting that day. I am extremely impressed for the price.
-
Description
It fits my taurus g2 as it said in the description
-
Best sight
Just what he wanted, Thank You!!!
