- This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger LCP MAX by Replacing the Rear Sight with this Optic Mounting Plate. Attention! Torque screw to 12inch/lb. For screw glue, we recommend to use loctite treadlocker.
- Comes with several pairs of screws for ADE, Shield, Holosun, and Sentinual red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longer/shorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- This plate fits JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Burris Fastfire C, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo
- Also fits Holosun 507K, Holosun 407K, ESP, ESP Carry but may need sanding. The location of the studs on the Holosun 407k and 507k may vary slightly due to differences in production runs. While the pegs provided are correct for the listed optics, there can be some minor variations observed over the past year. If necessary, sanding the locating studs can help ensure a proper fit in the case.
- Installing the aftermarket optic plate is not simply “plug and play”. We recommend having a qualified and competent gunsmith to install
- Torques screw to 12lb/inch. Blue screw glue is required and not included. Aircraft Aluminum in black finish.
- Weight .4oz
- All metal construction.
8 Reviews Hide Reviews Show Reviews
-
Excellent Upgrade Without Permanent Modification
I wanted to mount a miniature red dot on my carry pistol without sending the slide out for machining, and this plate solved the problem perfectly. The fit was precise, the machining quality exceeded my expectations, and the optic mounted securely with no noticeable play. After applying blue thread locker and properly torquing the screws, everything has remained rock solid through hundreds of rounds. The plate maintains a clean appearance and positions the optic well for rapid target acquisition. Considering the quality of the machining, durable finish, and simple installation, I think this is one of the best values available for shooters who want to add a red dot while preserving the factory slide.
-
Installation Requires Patience
The product itself works well, but removing the factory rear sight was much more difficult than installing the mounting plate. Once everything was in place, the fit was excellent. Just don't expect this to be a five-minute installation if you've never worked on pistol sights before.
-
Outstanding Value
For the price, I honestly wasn't expecting this level of quality. The anodized finish looks great, all of the hardware was included, and installation was simple with the proper tools. I've recommended it to two friends already because it's been completely reliable.
-
Make Sure It's the Correct Model
The mount itself appears to be excellent quality, but I ordered the wrong version for my handgun. There are several similar HK models with different sight cuts, so double-check compatibility before ordering. That was entirely my mistake.
-
Holds Zero Extremely Well
After several range sessions, I haven't needed to touch the zero once. The plate fits tightly in the rear sight dovetail, and there is no noticeable movement under recoil. It's an excellent solution for anyone wanting to experiment with a pistol optic before committing to slide machining.
-
Great Alternative to Slide Milling
I wasn't ready to permanently modify my slide, so this mounting plate was exactly what I needed. The installation took about twenty minutes, and the optic sits securely. I removed one star only because first-time installers should definitely have a proper sight pusher.
-
Well Machined Mount
The machining quality really impressed me. The edges are clean, the finish matches my slide nicely, and the mounting screws lined up perfectly. I've put a few hundred rounds through the pistol and nothing has loosened.
-
Perfect Fit on My HK
This mounting plate fit exactly as advertised and made adding a red dot to my pistol much easier than I expected. Installation was straightforward, and everything locked up securely with no movement after zeroing. Excellent machining and finish.
