Gen 1, 2, 3, 4 Compatible Slide! Stripped MKII Bullnose RMR Cut Slide For Glock 17 Gen 1-4 G17 9MM Slide-- Works with Trijicon RMR/SRO, Holosun 407C/507C/508T, ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2

Black  MKII Slide For Glock 17 (Gen 1-4)

This aftermarket Glock 17 slide is machined from 416R stainless steel and features an RMR-pattern optic cut. It is designed for Glock 17 Gen 1, Gen 2, and Gen 3 frames and compatible Polymer80 frames. It can also be installed on a Glock 17 Gen 4 frame when assembled with Gen 3-compatible slide components and the included Gen 3 recoil spring/guide rod.

IMPORTANT GEN 4 COMPATIBILITY NOTICE:

This is a Gen 3-pattern slide. To install it on a Glock 17 Gen 4 frame, you must use Gen 3-compatible slide components. A Gen 3 recoil spring/guide rod is included to assist with Gen 4 installation. Other Gen 3 slide components are not included.

This slide is not compatible with Glock Gen 5 frames.

PRODUCT FEATURES:

• Fits Glock 17 Gen 1, Gen 2, and Gen 3 frames

• Fits Glock 17 Gen 4 frames when used with Gen 3-compatible slide components

• Includes a Gen 3 recoil spring/guide rod for installation on a Gen 4 frame

• Compatible with Glock 17-size Polymer80 frames

• Machined from 416R stainless steel

• Graphite Black Cerakote finish

• Precision-machined RMR-pattern optic cut

• Includes an RMR cover plate and mounting screws

• Made in the USA

OPTIC COMPATIBILITY:

The optic cut is designed for the Trijicon RMR footprint and is compatible with:

• Trijicon RMR and SRO

• Holosun 407C, 507C, and 508T

• ADE RD3-019 Stingray

• ADE RD3-020 Raptor

• ADE RD3-023 Valkyrie Gen 2

• Other red-dot sights using the same RMR footprint

WHAT IS INCLUDED:

• One Glock 17 RMR-cut slide

• One RMR optic-cut cover plate

• Cover plate mounting screws

• One Gen 3 recoil spring/guide rod

PLEASE NOTE:

• This is a stripped slide, not a complete slide assembly.

• A complete Gen 3 slide parts kit is not included.

• Barrel and sights are not included.

• Channel liner is not installed or included.

• Professional installation or installation by a qualified gunsmith is recommended.

• Verify proper fit and safe operation before use.

OPTIC INSTALLATION:

Use the correct-length screws for your optic. Tighten the optic mounting screws to a maximum of 10–12 in-lb. Applying one small drop of blue threadlocker is recommended.

Included cover plate screw size: 6-32 × 7/16 inch.

Because aftermarket frames, barrels, internal components, and optics may have different tolerances, minor fitting may occasionally be required.

Our new MKII slide design is lightweight and features aggressive cuts and angles, including a left-side window above the barrel lug to help balance the slide. At only 8.8 ounces, the MKII slide is approximately 22% lighter than our standard-cut slides.

MKII slides are 100% American-made from 416 stainless steel and heat-treated to 42–44 HRC for optimal strength and durability. This slide features an H-190 Graphite Black Cerakote finish and a precision-machined Trijicon RMR optic cut.

IMPORTANT GEN 4 COMPATIBILITY NOTICE:

This is a Gen 3-pattern slide designed for Glock 17 Gen 1, Gen 2, and Gen 3 frames. It can also be installed on a Glock 17 Gen 4 frame when assembled with Gen 3-compatible slide components.

A Gen 3 recoil spring/guide rod is included for use when installing this slide on a Gen 4 frame. Other Gen 3 slide components are not included.

This slide is not compatible with Glock Gen 5 frames.

PRODUCT SPECS:

• Caliber: 9mm Luger

• Overall Length: 6.74 inches

• Weight: 8.8 ounces (approximately 9 ounces)

• Material: 416 stainless steel

• Heat Treatment: 42–44 HRC

• Compatible Model: Glock 17

• Frame Compatibility: Gen 1, Gen 2, Gen 3, and Gen 4 with Gen 3-compatible slide components

• Optic Cut: Trijicon RMR footprint

• Finish: H-190 Graphite Black Cerakote

• Country of Manufacture: USA

PRODUCT FEATURES:

• New lightweight MKII design

• Approximately 22% lighter than our standard-cut slides

• Aggressive machined cuts and angles

• Left-side window above the barrel lug for improved slide balance

• Fits Glock 17 Gen 1, Gen 2, and Gen 3 frames

• Fits Glock 17 Gen 4 frames when used with Gen 3-compatible slide components

• Includes a Gen 3 recoil spring/guide rod for Gen 4 installation

• Compatible with Glock 17-size Polymer80 frames

• Heat-treated 416 stainless-steel construction

• Precision-machined RMR optic cut

• Includes a stylish optic cover plate—a $29 value if purchased separately

• Made in the USA

OPTIC COMPATIBILITY:

Machined for precise fitment of a Trijicon RMR. Also compatible with:

• Trijicon RMR and SRO

• Holosun 407C, 507C, and 508T

• ADE RD3-019 Stingray

• ADE RD3-020 Raptor

• ADE RD3-023 Valkyrie Gen 2

• Other red-dot sights using the same RMR footprint

WHAT IS INCLUDED:

• One Glock 17 MKII RMR-cut slide

• One optic cover plate—a $29 value

• Cover plate mounting screws

• One Gen 3 recoil spring/guide rod

PLEASE NOTE:

• This is a stripped slide, not a complete slide assembly.

• A complete Gen 3 slide parts kit is not included.

• The barrel and sights are not included.

• The channel liner is not installed or included.

• Gen 4 installation requires Gen 3-compatible slide components and the included Gen 3 recoil spring/guide rod.

• This slide is not compatible with Glock Gen 5 frames.

• Professional installation or installation by a qualified gunsmith is recommended.

• Verify proper fit and safe operation before use.

OPTIC INSTALLATION:

Use the correct-length screws for your optic. Tighten the optic mounting screws to a maximum of 10–12 in-lb. Applying one small drop of blue threadlocker is recommended.

Cover plate screw size: 6-32 × 7/16 inch.

Because aftermarket frames, barrels, internal components, and optics may have different tolerances, minor fitting may occasionally be required.