Stripped MKII Bullnose RMR Cut Slide for Glock 17/19/22/26 Gen 1-4 | RMR/SRO, 407C/507C/508T

Very nice and well made slide. The machining is very precise and fits perfectly on my glock 19 frame. The serration cuts on the side make it easy to grip when racking the slide. The FDE cerakote is also very nice. Would recommend overall and reasonable price

As previous reviews have stated, if you install supressor height sights, they will hang over the port. I also had an issue getting the front sight seated in to the fram to even get the screw started. It was a very tight fit. (Strike industries supressor height sights). And then that leads to the front sight screw not having enough clearance to properly seat the tool over the screw to secure it. You have to angle the tool to be able to get it snug. Which is not very good for the tool or the screw. Over all finish and quality are great. No issues. The strike industries upk fit with out problems. Also come with channel liner installed. Rear sight was also super tight. But I don’t have the proper tools for that. So could be normal. Next is the screws provided for the vortex venom red dot, they were either too long or too short. So now I have to find replacements. All that being said. It’s not a bad slide, but there’s others out there in the same price range.

The “Flat Dark Earth” color is great. I was concerned that it would be too light but it isn’t. This slide would look as great on a black lower as it will look on the fde lower I plan to use it on. The coating is immaculate, serrations are sharp but not too sharp and the RMR slot precut w/ a cover pre installed. This is the first stripped lower ever so I hope installation of the slide completion kit installs smoothly.

Fits like a glove..easy set up and looks awesome. My site fit perfect and the color is a great match to my original frame. Should buy the install pack with it though. I will buy another in the future

After reading the reviews I was hesitant to purchase this slide but I'm so glad I did. For me the slide performed flawlessly at the range right out the box. Mine had no issues with mounting the venom and I used a OEM slide kit. I'm confident in a self defense situation the slide will perform

I ordered this slide with the Vortex venom cut to replace my factory G19 slide with a red dot adapter. I put the red dot on in the beginning as an experiment to see if it was something I wanted for possible full time carry. Bought & installed Glock Gen 3 factory upper kit. Slide already comes with the firing pin sleeve insalled. Lightly lubed & Re assembled pistol with factory barrel & stainless steel guide rod that came with upper kit. Took it out & ran about 120 rounds of target load. Shoots perfectly!

Wanted to put a optic on my carry glock 19 gen 5 and still have backup sights, found this slide on optic planet at a nice price. I'm very satisfied with the slide, functions fine and nice looking. Can't complain and I recommend.

Very nice and well made slide. The machining is very precise and fits perfectly on my glock 19 frame. The serration cuts on the side make it easy to grip when racking the slide. The FDE cerakote is also very nice. Would recommend overall and reasonable price

As previous reviews have stated, if you install supressor height sights, they will hang over the port. I also had an issue getting the front sight seated in to the fram to even get the screw started. It was a very tight fit. (Strike industries supressor height sights). And then that leads to the front sight screw not having enough clearance to properly seat the tool over the screw to secure it. You have to angle the tool to be able to get it snug. Which is not very good for the tool or the screw. Over all finish and quality are great. No issues. The strike industries upk fit with out problems. Also come with channel liner installed. Rear sight was also super tight. But I don’t have the proper tools for that. So could be normal. Next is the screws provided for the vortex venom red dot, they were either too long or too short. So now I have to find replacements. All that being said. It’s not a bad slide, but there’s others out there in the same price range.

The “Flat Dark Earth” color is great. I was concerned that it would be too light but it isn’t. This slide would look as great on a black lower as it will look on the fde lower I plan to use it on. The coating is immaculate, serrations are sharp but not too sharp and the RMR slot precut w/ a cover pre installed. This is the first stripped lower ever so I hope installation of the slide completion kit installs smoothly.

Fits like a glove..easy set up and looks awesome. My site fit perfect and the color is a great match to my original frame. Should buy the install pack with it though. I will buy another in the future

After reading the reviews I was hesitant to purchase this slide but I'm so glad I did. For me the slide performed flawlessly at the range right out the box. Mine had no issues with mounting the venom and I used a OEM slide kit. I'm confident in a self defense situation the slide will perform Pros: Very good finish and operates as it should, great price

venom cut to replace my factory G19 slide with a red dot adapter. I put the red dot on in the beginning as an experiment to see if it was something I wanted for possible full time carry. Bought & installed Glock Gen 3 factory upper kit. Slide already comes with the firing pin sleeve insalled. Lightly lubed & Re assembled pistol with factory barrel & stainless steel guide rod that came with upper kit. Took it out & ran about 120 rounds of target load. Shoots perfectly!

Wanted to put a optic on my carry glock 19 gen 5 and still have backup sights, found this slide on optic planet at a nice price. I'm very satisfied with the slide, functions fine and nice looking. Can't complain and I recommend.

This slide is exactly what I was looking for! Additionally, I was very happy to see that a channel liner already came installed on this slide upon arrival. The RMR cut was perfect for my Holosun 407C, and I had no issues whatsoever moving all my OEM slide parts into this Trybe defense slide. I zeroed my optic and didn't experience any loosening of the screws or any jams or malfunctions. If you're looking to dive into the world of pistol optics and don't want to spend as much on a new slide as you would an entire new gun, this item will not let you down. It also comes with a cover plate for the cut, so that was a nice little surprise as well. I would recommend this product and would buy again. Pros: easy to assemble Style and function RMR Cut for Holosun 407CX2 Red Dot

Everything fit just fine. Internals. Sights. Cycles snap caps. Drop tested it on my thick carpet with snap caps. Firing pin didn’t move. Finish and cuts are nice. I’ll update review when I put some rounds through it. I’ll also be getting a trijicon rmr eventually

It’s a great slide, it’s a great look, it’s great with movement (lightweight), and it’s a great purchase at a reasonable great price

The only reason I ordered this slide is bc I randomly bought a Sig red dot that wasn’t RMR. This slide was the most expensive one I could find with the Sig DPP optics cut. Nevertheless, it definitely was not cheap! It’s a rare type of red dot base. So it being the least expensive one doesn’t mean it wasn’t expensive… Anyhow, the red dot seated beautifully, stays zeroed in, it hasn’t had a single cycling issue, it’s cute to look at, doesn’t have any scratches and that’s surprising, I beat it up a lot! All in all, I love it and couldn’t be happier! For 3 months, about 3k rounds and counting and it’s still flawless!

this slide does a lot of things right . cannot beat it for the price, shot 500 rounds through it no problems so far and finish is holding up quite well.. the only thing i can think of when mounting an optic on make sure you have 6/32 corse screws Pros: Price Finish fitment Optic Cut