ADE 2023 RD3-028 ARES PRO Motion Awake Red Dot Sight with with Weather Shield for Optics Ready Pistol Slide/Cut that is compatible with Doctor Footprint
- 1.00 Ounces
- Free Shipping
ADE is releasing the 2023 PRO SERIES for ADE RD3 series that fits a varieties of popular optic footprint on the market. The additional features that the PRO series includes are Multi Reticle Technology(select models), Motion Awake System and are a new cosmetic redesign by ADE in Oregon City, Oregon.
ADE RD3-028 Ares Pro is equipped with the Motion Activated System. While the Ares Pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Users also have the option to manually turn the red dot power off to disable the Motion Activated System.
The overall length is longer than traditional red dot, therefore it only fits on the optic plate that sits ABOVE the slide( typically the plates replacing the rear sight). It does not sit into pistol slide with a milled optic cut because those cuts are typically made for red dots with standard length. The dimension for Ares is 1.84" length x1.30" width x1.15" height
ADE RD3-028 Ares Pro is designed with a removeable Weather Shield that protects the sight from moisture and provides a clearer sight picture during inclement weather. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun.
Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.
Side Battery Load System, no need to Remove the sight to change the Battery.
Shockproof, Fogproof. 3.5MOA red dot. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032
Comes with a removeable picatinny plate, lens cloth, instruction, tool, battery.
ADE RD3-006B, RD3-009, RD3-012, RD3-013 and RD3-028 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
ADE RD3-018 Spike, RD3-021 Nuwa and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.