ADE is releasing the PRO SERIES for ADE RD3 series that fits a varieties of popular optic footprint on the market. The additional features that the PRO series includes are Multi Reticle Technology(select models), Motion Awake System and are a new cosmetic redesign by ADE in Oregon City, Oregon.
Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
The ADE Delta PRO(D3-012PRO) has Motion Activated System technology. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
1.75" length x1.25" width x1.15" height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
ADE RD3-006B, RD3-009, RD3-012, RD3-013 and RD3-028 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
ADE RD3-018 Spike, RD3-021 Nuwa and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
28 Reviews Hide Reviews Show Reviews
-
Not bad for the price
Reticle is plenty bright and shake awake works well. Holds zero on a 9mm. Glass does have some distortion around the edges but not unusable. Great for a pcc.
-
works well and well packaged
its sturdy the sights are really nice
-
5.0 out of 5 stars Works well, worth every penny
This is a great choice for upgrading your weapon on a budget. As far as I can tell, it is every bit as good as my buddy's Holosun, but at a third of the price!
-
Very nice quality red dot sight with shake awake technology.
Very nice quality red dot sight with shake awake technology. This sight is well made and easy to use and has some nice features. The red dot is very precise and has lots of brightness levels. The multi reticle system is nice to have which most other sights don't have. Overall a good bargain if you ask me.
-
Works great.
This optic is easy to install and provides an amazing sight picture.
-
Works well, worth every penny
This is a great choice for upgrading your weapon on a budget. As far as I can tell, it is every bit as good as my buddy's Holosun, but at a third of the price!
-
Hubby's first laser sight
I chose this for my husband who was surprised by it. He said it was easy to install and took it to the range to sight in. He stated that it was easy to use and helped a LOT with accuracy. He did say it is going to take awhile to get used to it.
-
So far so good
I installed this on my RUGER SR9c in about 15 minutes (including removal of the rear sight) with the adapter plate for the rear sight. I’m impressed with the build so far, but will see after a range day to sight it in, how it will hold up. I tightened the screws and used blue lock-tite so expect them to hold secure. One word of warning—the lowest setting is invisible to the eye, so be sure when you turn it on the first time, that you raise the intensity a few notches. I thought at first that I had a bummer as it didn’t show a dot at first.
-
Easy Install, Top Load System
This review is for a PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut that’s Compatible with Doctor Footprint. This is a great little Red Dot with a top load system, so there’s no need to remove the sight to change the battery which is very convenient. It comes with a tool, removable plate with screws, a cover, lens cloth and instruction manual. I had a heck of a time trying to put it on until I went back to the amazon page and read that you need to press and Hold the DOWN switch for 3 seconds to manually turn on/off the power, and a quick press up then down switches to adjust brightness. I like and recommend this red dot.
-
feature packed red dot
This red dot has a ton a features for the cost. I have decided that I'm not really into the circle and dot for a reticle anymore but have been going back and forth between the circle or dot. So far I have found that if I want anything other than a dot, I have to go with a multiple reticle system. There is no just circle sights available and the multiple reticle systems are usually more expensive. So this is a nice optic to have if you want to go with a circle or circle dot. With the waterproof rating, motion activation and 20000 hours battery life, this is a nice budget option for carry. Having used several ADE dots I'm comfortable with it for carry.
-
Excellent sight for the price!
I can’t say enough good things about this optic! It’s jam packed with a bunch of really cool features that you would normally expect from a much more expensive sight. You can cycle through three different types of red dot designs and it even has this really cool motion detection feature that saves the battery life. I’m not sure about other firearm models but it fits my Gen 5 Glock 19 just fine (not included attachment required). The glass is crystal clear and the housing if the soft itself is really well put together. I will definitely be looking into getting more optics from ADE and recommend it to my gun buddy the next time we go shooting.
-
Works and does the job!
So first things first, you see the American flag on the side and you would assume it is made in the USA, it is designed in the USA and produced in China. So many optics now days are made overseas, there is nothing wrong with that. It works and is competitive with the higher dollar red dots out there. If name brand is important to you, then you might be skeptical, however, save yourself some bucks to buy more ammo and shoot with this. I bet you will not be able to tell the difference between that higher dollar red dot versus this in a no label test. So please please please, read the installation instructions, like someone else mentioned know your firearms. This site is worth the money and functions like it should as long as it is installed and sighted in. I use mine on my pistol, I have had no issues with it.
