Ade Advanced Optics Raptor(RD3-020) Red Dot Sight For any handgun plate/slides/Cuts that are Compatible with Trijicon RMR Screw Pattern/Footprint - 2MOA Red Dot

The ADE RD3-020 Shake N Awake red dot fits all pistol with optic cuts for Trijicon RMR, including aftermarket slide such as Rockslides, Polymer80 and PSA that has a optic cut for Trijicon RMR Pattern..

The Raptor has Motion-On/Wake-Sleep technology. While Raptor is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. When raptor is manually turned off by press and hold the power switch for 2 seconds, it will also turn off the sensor.

Dimension 1.47x1x1.1 inches. Weight 1.06 oz. Shockproof/Fogproof/RainProof.

Operates with a single CR2032 battery(included). Battery life is up to 50000 on low and 500 on brightest setting. You hold + and - for 2 sec to turn on, and hold both + and - to turn off. Since it has a motion sensor to go to sleep, users do not really need to power it off. When the unit is powered off, the motion sensor is turned off too. 1-10 levels of brightness intensity.

2 MOA Red Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol

The RAPTOR is equipped with ADE smallest 2 MOA illuminated red dot, designed to be used on pistols, shotguns, and rifles. It comes with a removeable picatinny mounting plate and can also be attached to a varieties optics ready handgun with RMR footprint mounting plate/optics cut. To turn the unit on, press and hold the + or - button for 2 seconds. To turn the unit off, press and hold both + and - buttons for 2 seconds. To adjust the brightness, quick press + button to increase brightness, quick press – button to decrease the brightness The Raptor has Motion-On/Wake-Sleep technology. While Raptor is turned on, the red dot illumination goes sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. When the unit is powered off, the motion sensor is turned off too.