ADE Zantitium (RD3-015-PRO ) PRO Series Motion Activated with Multi Reticle System Red Dot Sight + Optic Mounting Plate for Sig Sauer P320 M17, M18, X5-Legion Pistol

ADE Zantitium (RD3-015-PRO ) PRO Series Motion Activated with Multi Reticle System Red Dot Sight + Optic Mounting Plate for Sig Sauer P320 M17, M18, X5-Legion Pistol

$139.99
(1 review) Write a Review
SKU:
RD3-015PRO + M17 Plate
Weight:
3.00 Ounces
Shipping:
Free Shipping
  • Comes with the new ADE RD3-015 PRO Zantitium PRO red dot sight, a picatinny plate, and a optic mounting plate designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
  • Please fully inspect your p320 model and optic cut before purchasing. The Pistol optic plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX. Does NOT fit standard X5 that does NOT has a loaded chamber indicator.
  • The pistol optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.

  • ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.

     

    The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System. 

     

    The ADE Zantitium PRO has Multi Reticle System. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness. 

     

    The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25" Length x 1.4" Width x 1.27" Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.

     

    The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).

      

    Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.

     

    Comes with a removeable picatinny plate tool, user manual, lens cloth, red dot cover, CR2032 battery, screws and a optics plate for Sig P320 m17/M18

Related Products

!