- This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to SAR9 Gen 1 and Gen 2 by Replacing the Rear Sight with this Optic Mounting Plate. Torque screw to 15inch/lb. For gun glue, we recommend to use loctite treadlocker
- It is compatible with SAR USA SAR9, SAR9 C, SAR9 METE, SAR9T, and SAR9 X models from Gen 1 and Gen 2 only. Please note, it will not fit other SAR 9mm models or the newer SAR9 Gen 3 pistols. It will not fit any optic ready SAR9 models that already has a optic cut in front of the rear sight.
- Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longer/shorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- This plate fits Vortex Viper/Venom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012(and Pro),RD3-015(and Pro), RD3-028, RD3-018 Spike, , Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.
- Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, MAKdot 1×25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1×20, Burris Fastfire C
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Installing the aftermarket optic plate is not simply “plug and play”. We recommend having a qualified and competent gunsmith to install
- Torques screw to 12lb/inch. Blue screw glue is required and not included. Aircraft Aluminum in black finish.
- Weight .4oz
- All metal construction.
12 Reviews Hide Reviews Show Reviews
-
Dependable and Solid Build
Noticed a slight fit issue initially, but a quick re-alignment fixed it and now it’s tight and secure. Doesn’t wiggle and holds the optic firm during firing. Exactly what I hoped for to complete my setup.
-
Heavy-Duty Plate, Well Machined
This plate feels way higher quality than I expected at this price point. Clean CNC cuts and a nice finish. Paired it with a Swampfox Sentinel and hasn’t given me any trouble. Pretty straightforward install if you have basic tools.
-
Great Upgrade for a Shooting Club Pistol
We mounted this on a club SAR9 used for drills and it’s been solid. No rattle and no movement. A few folks even borrowed it just to test their optics. Wish OpticsFactory included a tiny instruction sheet with torque specs, but overall excellent.
-
Works, But Check Fit First
Plate works perfectly for the SAR9 models it’s designed for — I tried it on a friend’s pistol and it was flawless. One thing to note: if your optic has a unique footprint, double-check compatibility. Otherwise, very happy with the quality here.
-
Easy Install, Great Functionality
Installation literally took me longer to unpack the tools than to bolt this on. So far it’s been rock solid on my SAR9 T with a Sig Romeo Zero. Zero retention after multiple range trips has been fantastic. If you want something that just works, this is it.
-
Tight Fit and No Surprises
I was a little nervous ordering this because I hadn’t heard much about it, but it fit perfectly on my SAR9 X and made mounting my Docter sight simple. After a few dozen shots it’s held zero and hasn’t loosened up at all. Very satisfied.
-
Solid Plate but Screws Could Be Better
The mount itself is heavy enough and feels sturdy. My only issue was that one of the screw sizes included was slightly off for my optic, so I had to swing by the local hardware store for a match. Once I did that, it worked perfectly.
-
Kevin
This wasn’t the fanciest mount out there, but it did exactly what I needed it to do — hold my Romeo Zero securely. Didn’t strip any threads, and it didn’t wiggle loose after a range session. Great value for a straightforward plate.
-
Good Plate, Worth It
I installed this mount on my SAR9 METE to use with a Burris Fastfire. Fit was solid, and it didn’t feel flimsy at all. Took a few tries to get the alignment correct, but that was more on me than the plate. Works just as expected and I’d recommend it.
-
Smooth Upgrade — Zero Issues
Received this plate quickly and was pleasantly surprised by the quality for the price. The machining is precise, and the fitment on my SAR9 Gen 1 was perfect. After several hundred rounds, it still stays tight and hasn’t lost zero. Nice job.
-
Exactly What I Needed
Bought this to mount a Holosun 507K on my SAR9 CX and it worked great. Screws included were adequate and I didn’t have to go hunting for extras. The plate seems solid and durable. Only gripe is the instructions were basic, but if you’re handy it’s not a big deal.
-
erfect Fit for My SAR9!
I had been hunting for a reliable mounting plate for my SAR9 Gen 2 to run my Vortex Venom, and this plate fit like a glove. No wobble once tightened and the finish is clean. Installation took me about 15 minutes with basic screwdrivers. Really happy with how snug everything feels — no creaking or shifting even after a few magazines worth of rounds.
