- This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to SAR USA CM9 Pistol by Replacing the Rear Sight with this Optic Mounting Plate. Attention! Torque screw to 12inch/lb. For screw glue, we recommend to use loctite treadlocker
- Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longer/shorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- This plate fits Vortex Viper/Venom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012(and Pro),RD3-015(and Pro), RD3-028, RD3-018 Spike, , Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.
- Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, MAKdot 1×25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1×20, Burris Fastfire C
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Installing the aftermarket optic plate is not simply “plug and play”. We recommend having a qualified and competent gunsmith to install
- Torques screw to 12lb/inch. Blue screw glue is required and not included. Aircraft Aluminum in black finish.
- Weight .4oz
- All metal construction.
12 Reviews Hide Reviews Show Reviews
-
Does its job very well
Small part but big impact. Added a Shield RMSc to my CM9 quickly. Took some trial and error figuring which screws fit best, but solid once done.
-
Sized just right for my SAR CM9
This is specific to the CM9 model but that’s exactly what I needed. Mount lined up flawlessly and I didn’t have to modify anything.
-
Good fit, very discreet mount
Love that this doesn’t look bulky or goofy on the slide and doesn’t alter my holster fit. The optic sits low and feels natural to acquire.
-
Easy to install once you know what you’re doing
No instructions, so it wasn’t totally intuitive at first. Once I figured out torque and which screws fit my Riton MPR, it went super smooth.
-
Installed my Holosun 507K in minutes
Followed torque specs and threadlocker recommendation and it’s stayed put through a bunch of dry-fire practice and range sessions. Great simple solution for optics.
-
Got rid of factory sights, added red dot easy
Swapped out the stock rear sight for this plate and now have a Burris Fastfire 3 up top. Zero shift has been negligible for the first 100 rounds.
-
Screws could be better but works great
Mounting plate works exactly like it should, but the included screws were a bit short for my optic footprint. Grabbed longer ones from Ace and it’s rock solid now.
-
Solid build, fits as advertised
Plate material feels strong, finish is good, and it fits without gaps. I was able to mount an ADE RD3-009 Crusader with no binding or weird angles.
-
Great budget option for optics on SAR CM9
I wasn’t about to pay a gunsmith for an optic cut, so this plate was a great deal. My Sig Romeo Zero lines up well and is holding zero after a couple trips to the range.
-
Not complicated, just takes patience
Installation wasn’t rocket science, but you do want a torque driver for this. Didn’t come with instructions, but I used a quick YouTube guide. Now my Burris Fastfire C sits nice and secure.
-
Good plate, came with lots of screw options
I wasn’t sure if my Vortex Venom would fit, but the multiple screw pairs made it easy to match the holes right. Didn’t have to hunt for parts, and the mount feels solid once tightened.
-
Perfect way to add a red dot to my CM9
Finally got this installed on my SAR CM9 with a Holosun 407K. Took about 20 minutes to swap out the rear sight and get everything torqued down with some blue Loctite. Holds tight and I’m seeing tighter groups now that I can aim with both eyes open.
