ADE RD3-006B-2 Green Dot Reflex Sight with Mounting Plate for Colt 1911 Standard and Picatinny Rail
Includes a mounting plate for Colt (G.I.) 1911 standard rear sight. Also comes with a standard Picatinny/Weaver mount.
Note: There are several types of rear sights on 1911 pistols such as Colt/G.I., Novak/Adjustable, Lomar, and LPA. This listing is for 1911 pistols with the Colt Standard Rear Sight. Please verify your pistol's rear sight type with the manufacturer before purchasing.
Installing an aftermarket optic plate is not simply plug and play. We recommend having a qualified gunsmith perform the installation.
Product Features
Manufacturer Part#: RD3-006B-2
Motion Activated System technology. The green dot illumination goes to sleep after five minutes of inactivity and instantly turns back on to the previous brightness setting when motion or vibration is detected.
Front-mounted on/off switch for easier operation than typical side-mounted switches.
3 MOA green dot with 5 illumination settings.
Can also be mounted on a long-range rifle scope as a backup sighting system.
Optical and Mechanical Specifications
Magnification: 1X (no magnification)
Sight window: 25mm x 16mm (0.98" x 0.62")
Parallax-free at approximately 50 yards
Windage and elevation fully adjustable and lockable
Adjustment range: 3 degrees or 190 inches at 100 yards (524 cm at 100 m)
1 MOA per scale division with 60 divisions per turn
Dot subtension: 4 MOA (approximately 10.5 cm at 100 m)
Recoil resistance rated at least 1000 Gs
Unlimited eye relief
Operating temperature range: -10°F to +130°F (-25°C to +55°C)
Storage temperature range: -40°F to +160°F (-40°C to +70°C)
Construction
Lenses are precision ground and polished to exact geometries to virtually eliminate parallax and provide a crisp, clear sight picture.
Fully shockproof and fogproof.
Dimensions and Weight
Length: 2.0 inches (52 mm)
Width: 1.0 inch (26 mm)
Height: 1.1 inches (28 mm)
Weight: 0.9 oz (25 g) without mounting hardware
Package Includes
ADE RD3-006 green dot sight
Mounting plate for Colt 1911 standard rear sight
Picatinny/Weaver mount
Allen wrench and screwdriver
Adjustment disc
Protective cap
Extra rubber sealing ring for battery compartment
CR2032 lithium battery (included)
Operating instructions
1 Review Hide Reviews Show Reviews
-
so easy to install, that even I can do it
So far I haven’t had any problems with it. Installation was super easy so was adjusting zero. For the money this green dot works every bit as good as the name brand hi dollar units
