-
This pistol mount will fit:S&W M&P Shield 9 EZShield EZ 30 Super CarryThis pistol mount does not fit:Smith & Wesson M&P C.O.R.E Series (Already optics ready)M&P Shield PistolSmith & Wesson M&P .22 CompactSmith & Wesson SW9VE, SW40VE, Sigma, SW9, SW40Smith & Wesson Shield PlusSmith & Wesson MP/MP2.0Any optics ready pistol
-
- This plate fits Vortex Viper/Venom, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012(and Pro),RD3-015(and Pro), RD3-028, RD3-018 Spike, ADE RD3-003,RD3-006, ADE RD3-009,RD3-012(and Pro),RD3-015(and Pro), RD3-028, RD3-018 Spike, RD3-021 NUWA, RD3-021 NUWA PRO, RD3-030 Apollo, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III,QUICKsight 5.0 VR, Noblex Sight G,Burris Fastfire 2, 3, Delta Optical MiniDot,Delta Optical MiniDot II,Hawke Reflex,Sightmark Mini Shot Pro Spec,Mini Shot M-Spec,Leica Tempus, MAKdot, Vector Optics SCRD-19II Frenzy,Creative XP GlassEagle HD, HEX Dragonfly,CT RAD Pro, Cyelee CALF V2,Vomz Pilad.
- Also fits Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1×25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1×20.
- Please notes, this plate fits the RMSc/407k footprint red dots. Those red dots will need to use the two rear screw holes and will not use the two align pegs at the end corners. Such as Holosun 407k/507k,Vortex Defender CCW, Hex Wasp, ADE RD3-018 Spike, ADE RD3-021 NUWA, ADE RD3-030 Apollo, Shield RMS, Sig Romero Zero, Jpoint, Riton 3 Tactix MPRD ect.
- Comes with several pairs of screws for ADE, Shield, Holosun, Vortex, Burris red dots. The screws should fits most of the listed red dot but not guaranteed for every red dot. If you need the longer/shorter screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
-
- Made using the highest quality materials. One piece design.
- Attaches firmly to your firearm for sure performance in tactical situations
- Replaces the Picatinny mount packaged with the Red dot sight
- All mentioned brand names are the trademark of their respective owner, this mounting plate is an accessory made by a third party manufacture for connecting red dots to pistol.
- Red dot sight and pistol gun are not included, this listing is for mounting plate only. Mounting screws are included.
Below is an installation video for the EZ plate and the ADE red dot.
23 Reviews Hide Reviews Show Reviews
-
plate
I ordered the wrong size but i bet it wouldve worked great!
-
Mounted Easily, Complete Pack
This optic mounting plate worked perfect on my SW Shield EZ. Mounted a Romeo Zero to it and fit like a glove. It is aluminum and very solid and comes with screws that have Loctite on them. Good product. Recommended ?
-
Great Plate, Great Price
This is a very nice sight plate. The aluminum is thick and sturdy with nicely done threaded holes. Some of the cheaper plates are usually thin and the threads are bad. Install took about 10 minutes, including disassembly and included everything in the little bag it comes in. Highly recommended item.
-
Quality made for a9mm S&W Shield M&P
Great mount for my optics, remove the back attach this plate then attach your optics, ideal for Smith and Wesson Shield M&P 9 mm pistols
-
Quick and Easy Install
I received this mounting system plate and installed it tonight. This task only took a few minutes with the included Allen wrenches and the sight was likewise mounted. It was concerned at first as there was a lot of play between the plate and the sight, but upon tightening the mounting screws, it locked up nice and solid. The mounting plate is a bit thick, causing the sight to stand a little high (for my tastes), but it should still be useable.
-
recommend the purchase
Absolutely love it. Can't go wrong for the price! Easy to install, and fit just right! Comes with extra optic mounting screws, as well as a tension screw for securing to the slide. My optic fit perfectly! Very lightweight and durable!
-
Looks nice
Can not say anything bad about it seemed to do what I THOUGHT I needed. But it did not fit my gun. I can not hold that against these guys. Seems to be made nicely.
-
Better option that having your slide milled.
I wanted a red dot on my M@P Shield, but mine was not optic ready. Rather than buying a new slide, or having mine milled I gave this a try. The installation is a little tricky, not horrible if you have a sight pusher. The fit is very secure and the optic mounted very securely. It looks as if it was an original optic ready pistol. It is working for me without issue.
-
Nice scope mount
Mounts on my MP easy and works great with my optic. Lines up where it should.
-
Works perfect
This is one of those items that typically either works or it doesn't and this worked fine. It matched perfectly with the cut and fit of my Smith & Wesson Shield 9 EZ. This plate is pretty much necessary when installing an optic on your pistol. My optic mounted to this just fine. I might recommend using a little bit of lock tight to keep the small set screws in place but other than that I’m happy with this.
-
Good fit for for the E-Z 9mm
This item fit my wife's S&W Shield 2.0 EZ. She installed it after removing the slide and taking out the hex screw under the sight. Then she put the plate on and secured it to the slide. Then put on her ADE red dot. Then secured it to the plate. Then used a bore sight to zero the scope and that's it. It is solid on the slide and does not budge. Very easy to install. Good value. So far it functions as intended.
-
Easy to install
Ordered this for my S&W M&P 9 EZ Performance Center to be able to mount an optic onto the firearm. Installation is very simple and replaces the rear sight. Fits nice and snug and does not move. Makes the firearm a lot more accurate with an optic on it. Great product for a non-MOS firearm.
