Looked good out of box and plenty of hardware. The dovetail for attaching to the slide was loose fittingand moved a lot. I could fit 2 layers of paper between the plate dovetail edges and the slide grove. The mount would not stay locked in place and the mounting screw kept loosening even with Blue locktight. Mounting the red dot one of the screw holes striped and kept loosening when fired. I was not impressed!

Just what he wanted, Thank You!!!

Nice sight the mounting plate fit perfect good and tight no wiggling plan to get another one for my other Taurus G2C.

I bought the kit to mount this on a Taurus G2 Millennium (PT111) with the "old" style rear sight. The mount plate that was sent with the optic had a small dent in the front edge that is meant to hold the plate in place in the slide. In theory this would be great, however, the metal is soft enough that during installation, this peen dent basically flattens. I pressed forward - I used blue loctite on the super tiny screw that came out of the rear optic to install the mount plate/adapter. The description said a screw was included, but none of the included hardware fit my slide. Mounting the optic was noneventful. I placed the rubber "shock shim" which was included with the sight, and torqued the two fasteners down to 25 inch pounds. Used a laser boresight to get the dot close to center, and headed to the range. Because this slide was not designed to have an optic mounted on it, I found I had to drastically lower the dot, so that POA and POI were matched. I got fairly close. After a dozen or so rounds, I had to reset zero (not good). Four more shots and reset zero.. well this sucks, right? It wasn't the dot drifting, it was the mounting plate loosening. Like, SLOPPY loose. Ok, back home I go, pull it all apart, used a punch to re-peen the mount plate. tried ALL of the hardware again to see if MAYBE i missed the screw that should hold the mount adapter, nope. Applied red loctite and tighten to 25in/lbs.... The plate doesnt work. The recoil was too much for it. I lasted longer with the red loctite, but the recoil began to cycle the power on the optic. Not so I had to turn it back on, but it would shut off, then turn back on - that's odd. This was a fun experiment, but nothing I can run safely. At the end of the day, guns are for safety and if you cant see your target, they're worthless. Caveat - i replaced the slide with a G3 TORO slide (yep, it fits), ditched the mount plate provided with the optic and used the RMR adapter for the slide, and the optic works like a champ. These are fun for plinkers, but sadly, if you choose to run a Taurus CCW, you're gonna need to buy an optic that costs as much as your gun to be safe and reliable.

Was very easy to install good quality very accurate once sighted in

Fit my Taurus G2C perfectly!!

A red dot sight for my wife's gun. No issues so far.

Very nice product and well made.

did not send complete product in first shipment but once they where they was contacted they did a great job of making it right. Am very happy with fit and ease of installation. Looks and works great. Will be telling all my shooting buddies about this.

First time buying and I’m happy with my purchase

So I was concerned about this fitting my taurus g2 pt111, and it fit perfectly very easy install. Read up on zero the optic unless your experience I am, so this was great fit many parts and screw bc it also fits glocks must have really I love it.

I purchased this red dot for my son. He wanted a red dot sight for a new a handgun he purchased. We are very pleased with the MOA on this red dot sight. When considering choices that can go into several hundred dollars don’t overlook this one. It’s a great value and gets the job done! We’ve used it for a few months now and no problems works great. One thing it does take some time to get used to using the sight. The best way to use this sight is two aim with both eyes open when acquiring the target. Traditionally, you close one eye and aim at a target. We found the adjustment and easy transition and really enjoy using this red dot sight. Would highly recommend to anyone in the market for a cost effective red dot sight!

I love it looks real good on my g2c I’ll definitely keep getting off u guys

Fits a tx22 (1st generation) perfectly. Easy install. Easy to zero using barrel site laser. After 500 rounds, holding zero . Too bad they don’t make one for 2nd generation.

So far so good! Installed in minutes. Looks to be a great addition!

Very easy installation, and fits my Taurus G2 millennium perfectly!

I finally found a optics mounting plate that fit the Taurus G2C. Went through a few other plates that were supposed to fit to no avail. Finally found this one that fits, specifically when you remove the original sight that is held on by one screw. NOTE: I DID have to slightly file the end of the plate for it to fit into the slot. This was probably due to the powdercoating and not the maufacturing. The filing did not damage anything but becaude I was a little heavyhanded, I needed to use a black marker to lightly touch up one of the edges. I would buy again and hopefully, they have one to fit my Canik Mete MC9 as well.

quality product,affordable

Great item with great quality and great price and also great service. Easy to install and works perfect.

This mount is great for Taurus G2C. Easy installation. I would buy again.

Fit perfecly

Nicely machined piece. Highly recommend

I was upset at first because the plate would not fit into the rear sight cut because the plate is cut to fix a rectangle cut slide and my sight cut is a trapezoid. in order to make it fit I had to file the flange that fits into the rear sight cut down until it would fit. But I think it will work.