-
This mount fits:
Beretta 92 FS
Beretta 92 G
Beretta 92 FS Fusion
Beretta 92 Fusion Black
Beretta 92 Fusion Blu
Beretta 92 FS Inox
Beretta 92 A1
Beretta 92 FS Brigadier
Beretta 92 FS Brigadier Inox
Beretta 92 G Elite
Beretta 92 Compact
Beretta 92 Compact w/ Rail
Beretta 92 Compact with Rail Inox
Beretta 92 Vertec Inox
Beretta 92G-SD
Beretta 92X Centurion
Beretta 92X Compact
Beretta 92X Compact w/ Rail
Beretta 92X Full Size
Beretta 98 A1
Beretta 98 FS
Beretta 90 Series Inox
Beretta M9
Beretta M9 Exclusive
Beretta M9A1
Beretta M9A3
Beretta M9A3 Black
Beretta 98 FS Inox
Beretta m9 22lr
This mount does not fit (including but not limited to):
Beretta 92 Optics Ready Models
Beretta 92 FS Centennial
Beretta 92 Performance
Beretta 92 Performance Defensive
Beretta 92 RDO Compact Y22
Beretta M9 A4 Centurion Y22
Taurus 92While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- Manufacturer Part# rd3-006b-2
- Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
Fully shockproof and fogproof.
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture
Fully windage and elevation adjustable and lockable
3 MOA
5 Illumination Settings.
Powered by a lithium CR2032 battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50 yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to +130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium battery
Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)
Weight (in operating condition without mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Mounting plate for BERRETA
Extra rubber sealing ring for battery compartment