-
✅ ADE RD3-006 Green Dot Reflex Sight | Doctor Footprint | Motion Activated | Designed in Oregon
Includes Picatinny Mount & CR2032 Battery
? Key Features
-
Doctor Footprint – Compatible with handgun optic plates/slides cut for Doctor / Vortex Venom / Burris Fastfire.
-
Also includes Picatinny mount for rifles, shotguns, or pistols with rails.
-
3 MOA Green Dot with 5 brightness levels for versatile daylight and low-light use.
-
Motion Activated System – Auto-sleeps after 5 minutes of inactivity and instantly powers back on with any movement or vibration, restoring the last brightness setting.
-
Windage & Elevation Adjustable, with lockable turrets to maintain zero under recoil.
-
Unlimited eye relief for fast target acquisition.
-
Powered by 1x CR2032 lithium battery (included).
?️ Built to Last
-
Since 2014, this sight has been continuously improved for better durability and recoil resistance.
-
Recent updates include enhanced front switch, battery housing, and upgraded hardware.
-
Designed in Oregon, USA.
⚠️ Installation Note
While it can be installed by experienced users, we strongly recommend a professional gunsmith. Improper torque can cause loose screws, loss of zero, damage to your firearm or optic, and even personal injury.
? Have Astigmatism?
If your dot looks like a starburst, smear, or double-dot, you likely have astigmatism (very common and often undiagnosed).
✅ Simple test: take a picture of the dot with your phone. If it shows a clean round dot in the photo, your eyes are the cause.
? What’s Included
✔ ADE RD3-006 green dot sight
✔ Picatinny mounting base (pre-installed)
✔ CR2032 battery
✔ Adjustment tool & screws
✔ Instruction manual -
----------------------------------------------------------------------------------------------------
Additional information's about ADE red dots
ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint.
Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints.
ADE RD3-018 Spike, RD3-021 Nuwa(and RD3-021Pro NUWA Pro) RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie, RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
When you first receive the ADE red dot. It might have a picatinny mounting plate pre-assembled(might be packaged separately in the retail package, depending on the ADE model). Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.
107 Reviews Hide Reviews Show Reviews
-
Don’t look anymore for a great pistol reflex site. This is it.
Fantastic reflex “green” dot site for a pistol. I put this one my Ruger Mark IV Lite, got it sited in and I’m shooting 2” groups at 25 yards. And that’s just the first 50 Rounds! It will only get better. The value is fantastic and super easy to adjust.
-
Great sight for the money.
Great sight for the money. I didn’t know if I was going to like a RDS on my Glock 34 so I didn’t want to spend a lot. Glad I went this route. The sight is great, holds zero, and easy to use. My only issue is that will have to remove the sight to replace the battery. Wish there was a cap on top to replace it. That’s my only issue with it.
-
Great sight at a great price
Very nice sight for the money. Mounted it on my RIA 1911. Not bad. Replacing the dove tail sight adapter was a pain to remove. I suggest a sight tool as it took some TY orque to get off the old sight and put the adapter on as it is very snug. Other than that the sight works awesome!!!
-
Great sight for the money.
Great sight for the money. I didn’t know if I was going to like a RDS on my Glock 34 so I didn’t want to spend a lot. Glad I went this route. The sight is great, holds zero, and easy to use. My only issue is that will have to remove the sight to replace the battery. Wish there was a cap on top to replace it. That’s my only issue with it.
-
Don’t look anymore for a great pistol reflex site. This is it.
Fantastic reflex “green” dot site for a pistol. I put this one my Ruger Mark IV Lite, got it sited in and I’m shooting 2” groups at 25 yards. And that’s just the first 50 Rounds! It will only get better. The value is fantastic and super easy to adjust. This is the one to get!!
-
Save 150.00 dollars and give it a try.
This unit mounted as it should. Was easy to zero in and I am astonished at the accuracy. With the cost of ammo I have only shot 50+- rounds and it has held zero. Brightness in full 2pm sun no shade in more than great on the 3rd & 4th settings.
-
I love this product
I am really impressed with the red dot sight, it holds a zero and the brightness is really really good. What I love most is that I receive one that was damage and before I can send The other one back they were already sending me a new one which I have now.
-
Way to easy to install
Perfect fit, don’t over tighten the screws and use thread lock
-
Can't be beat for the price
I looked at a lot of optics for my Taurus TX22 and for the cost of the RD3 you would be hard pressed to find a better deal. Easy to mount, easy to sight in and real easy to see even in bright light. I'm so happy with this optic I will be trying one on my EDC 9mm.
-
Great sight for the money
You aren't going to get any better than this sub $65. The sight is nice and bright, even during the day. Easy enough to adjust and dial in the accuracy. I mounted mine on an M17 (with rail adapter). It makes a great pistol sight. Fairly low profile and easy to shoot with both eyes open. Remember to loosen the locking screws before making any adjustments to the sights or you could damage the optics.
-
Great little green dot
It’s a good looking optic. I put it on a Ruger mark iv lite. It looks fantastic, I wish the green light was a bit brighter but it’s honestly not horrible. Still able to see clearly in broad daylight. It’s easy to adjust and easy to zero in. It has held its zero perfectly throughout 100 rounds so far! Can’t wait to shoot it more. Makes my gun look that much better.
-
A nice entry point into pistol mounted optics
I purchased this optic based on the fact that ADE has a mounting plate for SR series Rugers and they are very reasonably priced. The reviews seemed worthy of purchase and I wanted to try my hand at some modest gun smithing and optical sights on handguns. The sight is very well built and finished. The overall look of the sight is something you would assume costs several times your investment. I am looking forward to taking this to the range to see how it withstands use.
