- This combo listing includes an ADE RD3-028 red dot sight, a mounting plate specifically designed for SAR9 Gen 1 and Gen 2 pistols, and a standard picatinny mount. It is compatible with SAR USA SAR9, SAR9 C, SAR9 METE, SAR9T, and SAR9 X models from Gen 1 and Gen 2 only. Please note, it will not fit other SAR 9mm models or the newer SAR9 Gen 3 pistols.
- ADE RD3-028 Ares Pro is equipped with the Motion Activated System. While the Ares Pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Users also have the option to manually turn the red dot power off to disable the Motion Activated System.
- The overall length is longer than traditional red dot, therefore it only fits on the optic plate that sits ABOVE the slide( typically the plates replacing the rear sight). It does not sit into pistol slide with a milled optic cut because those cuts are typically made for red dots with standard length. The dimension for Ares is 1.84" length x1.30" width x1.15" height
- ADE RD3-028 Ares Pro is designed with a removeable Weather Shield that protects the sight from moisture and provides a clearer sight picture during inclement weather. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- Comes with a removeable picatinny plate tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Shockproof, Fogproof. 3.5MOA red dot. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
ADE RD3-028 Ares Shake Awake Red Dot + Optic Mounting Plate for SAR USA SAR9 Gen 1 and Gen 2 Pistol
$109.99
- SKU:
- RD3-028+HM22(Optic Plate for Sar9)
- Weight:
- 2.00 Ounces
- Shipping:
- Free Shipping