- Manufacturer Part# rd3-006b-2
- Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
Fully shockproof and fogproof.
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture
Fully windage and elevation adjustable and lockable
3 MOA
5 Illumination Settings.
Powered by a lithium CR2032 battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50 yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to +130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium battery
Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)
Weight (in operating condition without mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Mounting plate for RUGER SR9, SR9C, SR40C, SR40, SR45
Extra rubber sealing ring for battery compartment
Ade Advanced Optics 1 Year USA warranty
2 Reviews Hide Reviews Show Reviews
-
red dot sight
This is not the best product I have bought lately. Replaced the rear sight on my sr45 ruger with this red dot sight and not only did the sight never line up with the target but after a couple of times of readjustment the sight dot would move after shooting a couple of rounds. And even when I used thread locker for the set screws the sight plate would come loose and move around after about 30 rounds. This sight looks very nice but the functionality of it is the worst . Reinstalled my factory sight and no worries only results. If you only care about looks and not functionality then this is the sight for you.
-
Finally!
I finally find a plate with the dovetail that fits a ruger and comes with a red dot ! That's awesome !. The red dot is pretty bright and instructions are straight to the point .
