Red Dot Sight for Ruger LC9,LC380

ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots The Valkyrie is the ONLY GREEN dot sight on the market that fits RMR...

Ade RD3-020 Rapter is a 2 MOA Red Dot designed to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots   The Raptor has Motion-On/Wake-Sleep technology. While Raptor is turned on, the...

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon. One of the change of new 2021 model compare to...

MODEL RD3-009-D The mainly new change of 009D compare to other 009 productions is 009D has a cut underneath at the base near the the rear portion, it reduces the overall length of the base area where attaches to the handgun plate. This slightly shorter...

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.   Allows the red...

This Adapter plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol by replacing the rear sight. This red dot sight fit ADE model RD3-006, RD3-009, RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium) red...

Comes with mounting plate that replaces the rear sight dovetail of RUGER LC9, LC380, LC9S and also a standard picatinny mount. Will not fit SR9E or EC9S New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low...

Comes with mounting plate that replaces the rear sight dovetail of RUGER LC9, LC380, LC9S and also a standard picatinny mount. Will not fit SR9E or EC9S New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low...

Comes with mounting plate for RUGER LC9, LC380, LC9S and also a standard picatinny mount. Will not fit SR9E or EC9S Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last...

Comes with mounting plate for RUGER LC9, LC380, LC9S and also a standard picatinny mount. Will not fit SR9E or EC9S We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and...

Optic Shim is made to fit between the red dot and the mounting plate. Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight Also Fits: Eotech MRDS, Sightmark, Meopta. All trademarks mentioned belong to their respective owner, this optic...

Optic Shim is made to fit between the red dot and the mounting plate. Fits: Trijicon RMR. Trijicon trademark mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics Also Fits: Ade...

Optic Shim is made to fit between the red dot and the mounting plate. Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel  Micro Red dot Sight. All...

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot.  The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on...

RD3-011 is compatible with handguns with mounting plates made for Trijicon RMR ONLY. It has the same footprint/cut/mounting plate as Trijicon RMR. We recommend OUTERIMPACT brand that their mounting plates are compatible with Trijicon RMR.    ...

Hollow body single piece machined aluminum riser mount, designed to shave precious ounces of weight off your build 45 degree forward extending riser mount for mini red dot sight Fits 20mm Weaver and Picatinny Rails with 3 ring slots. High profile in...

MODEL RD3-009-2 Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Lenses are precision ground and polished to exacting...

This is a picatinny/weaver mounting plate for attach to variety of handgun reflex red dot optics, such as below 1. Ade Advanced Optics RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 2. Vortex Venom 3. Burris Fastfire 4. Insight 5. Meopta 6. Docter 7...

Comes with mounting plate for RUGER LC9, LC380, LC9S and also a standard picatinny mount. Will not fit SR9E or EC9S   Manufacturer Part# rd3-006b-2 Can also be used with a long range rifle scope for that perfect Backup System The on/off...

This Optics Mount Plate is designed to connect Optics Red Dot Reflex Sight to Ruger LC9, LC9s, LC380 Pistol by Replacing the Rear Sight with this Optic Mounting Plate. Will NOT fit EC9s    Designed for Ade RD3-006, RD3-009,...

  Manufacturer Model RD3-013     Fits glock MOS System below   1. G17 Gen4 MOS   2. G19 Gen4 MOS   3. G34 Gen4 MOS   4. G40 Gen4 MOS   5. G41 Gen4 MOS   6. G35 Gen4 MOS   7...

Manufacturer Part# rd3-015 The 2019 Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25" Length x 1.4" Width x 1.27" Height. It gives up to twice bigger window than other micro red dot.The red dot is compatible with...

Fits glock MOS System below 1. G17 Gen4 MOS 2. G19 Gen4 MOS 3. G34 Gen4 MOS 4. G40 Gen4 MOS 5. G41 Gen4 MOS 6. G35 Gen4 MOS 7. G34 Gen5 MOS 8. G17 Gen5 MOS FS 9. G19 G34 Gen5 MOS SF 10. G34 GEN5...

RD3-006B The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System The on/off switch is located at the front of the sight,...

     Ade Advanced Optics Huracan RD3-006A Green Dot               We have pistol mounting plates for Berreta, S&W MP, Springfield XD, Colt 1911, Glock and HK USP, please copy the link below and open...

RD3-011 is compatible with handguns with mounting plates made for Trijicon RMR ONLY. It has the same footprint/cut/mounting plate as Trijicon RMR. We recommend OUTERIMPACT brand that their mounting plates are compatible with Trijicon RMR.   ...

Fits glock MOS System below 1. G17 Gen4 MOS 2. G19 Gen4 MOS 3. G34 Gen4 MOS 4. G40 Gen4 MOS 5. G41 Gen4 MOS 6. G35 Gen4 MOS 7. G34 Gen5 MOS 8. G17 Gen5 MOS FS 9. G19 G34 Gen5 MOS SF 10. G34 GEN5 MOS SF  ...