This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install
This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide.
This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.
This picatinny rail plate also have two built-in screw hole for red dot with Shield RMS/RMSc footprint and holosun 407k/507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny plate(sold separately).
Matt Black aircraft lightweight alluminum, weight 1oz.
Length 1.85in/46mm
Width .79inch/20mm -perfectly fits and hide inside the grove of red dot provided picatinny mounting plate
- This mount fits all generation Glocks:
Glock 17
Glock 17L
Glock 19
Glock 19x
Glock 20
Glock 21
Glock 22
Glock 23
Glock 24
Glock 26
Glock 27
Glock 29
Glock 30
Glock 30 SF
Glock 31
Glock 32
Glock 33
Glock 34
Glock 35
Glock 36 (Our mount is wider than the slide, but it will still work)
Glock 37
Glock 38
Glock 39
Glock 41
Glock 42 (Our mount is wider than the slide, but it will still work)
Glock 43 (Our mount is wider than the slide, but it will still work)
Glock 43x (Our mount is wider than the slide, but it will still work)
Glock 44
Glock 45
Glock 46
Glock 48 (Our mount is wider than the slide, but it will still work)
Canik TP9SF - Canik TP9 SA
Bersa BP9CC
Tactical Solutions .22lr Conversion
Advantage Arms .22lr Conversion
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS
Glock 19 Gen 4 MOS
Glock 34 Gen 4 MOS
Glock 35 Gen 4 MOS
Glock 40 Gen 4 MOS
Glock 41 Gen 4 MOS
Glock 22 Gen 5 MOS
Glock 23 Gen 5 MOS
Glock 34 Gen 5 MOS
Glock 45 MOS
Glock 43x MOS
Glock 48 MOS - Does not fit ANY/ALL Glock MOS models.
- Does not fit ANY/ALL Glock Aftermarket slides that are already cut for optics.
102 Reviews Hide Reviews Show Reviews
-
Picatinny Rail Optic Mount Plate for Glock
My husband wanted this for one of his glocks and he likes how it works. He had an easy time installing it as well.
-
Easy to install, accurate after refining sights
This was a pretty straightforward installation. The picatinny mount is lightweight, but sturdy. Once the rail was mounted and red dot sight was put on, it was a solid optical mount. No problems with it loosening after taking it to the range and firing several boxes of rounds.
-
Need a sight pusher for easy installation
It fits nice & tight on my Glock G17 3rd generation. It would be nice if the plate also has some marking/painting so that it can double as the original gun sight (for the times when a red dot is not installed on it). If you don't have a gun sight pusher, get that first for an easy installation. Otherwise, you must be very experienced & skilled in installing rear sights with a punch and a hammer.
-
Better than expected.
Look, it’s not the prettiest thing in the world but it works as it’s supposed to. It allows you to put an optic on your Glock full or compact size. I used it on my 19 GEN 5 and so far so good. I’ve put about 100 rounds Down range with it and it seems to be holding zero without any major issues. Only time will tell if it actually stands up. But this is not a bad option if you do not have an MOS slide already.
-
Super easy to install on aftermarket slide
This was a bit surprising to me as it was a lot easier to use on an aftermarket slide for a G23 that I’ve been building. It was really simple to get on there and then to tighten it down. How it holds up after a few hundred rounds will tell me whether I need to use some locktight or something of the sort. If that happens and doesn’t work well, I’ll update this review. Pros: Seems to be made well/quality materials Sturdy Great value Looks cool Super easy to install in aftermarket slide Cons: None so far
-
We can pretty much slide this one on, after tapping out the original!
This short Picatinny Rail has two screws on top to lock down the rail into our original rear sight dovetail slot. If we loosen them up, it is easy enough to slide it into position without much difficulty, then use the included tool to tighten those screws down. There are four threaded screw holes on top of this for various mounting options of different red dot sights, and it hosts other sighing options as well. The red dot sight I have allows me an option to simply rapidly mount it to the rail - which I am sure most of the red dot sights would support. Easy installation, easy to use, a variety of options for different budgets... all of this was far and above my expectations for this short Picatinny Rail. I love it, and even with nothing attached to it, it looks very sharp and professional. Five Stars!
-
High quality and durable.
Easy to install and adjust. Nice solid rail.
-
Awesome ?
Easy to install doesn't fall of when shooting, does it job.
-
Very great fit
I don't normally give reviews until a time period has passed to see how long it lasts so this is the exception. I had a similar universal mount from temp that was trash. This item fit so snug like a glove on my Glock.
-
Good upgrade
Easy to install and good quality. I recommend this product!
-
Holds zero
Holds zero on my g22.
-
Very precise
One must use the proper technique for removing the OEM rear sight (in my case on a Glock). Once that is complete, installation of this device is easy and provides an excellent mounting point for a reflex sight. Interestingly, once installed and prior to adding the reflex sight, one can still use the rail in lieu of the old iron sight.
