ADE APOLLO(RD3-030 PRO) 50000 Hours SOLAR POWERED+SENSOR ACTIVATED Red Dot Sight For Canik Elite TP9 SC,Canik METE SFT,Sig Sauer P322/P365XL,SW MP 5.7,Equalizer 9mm,Glock 43/48 MOS,Taurus GX4 Toro,605 Toro,856 Toro,Springfield Hellcat OSP,Masada SLIM

I've been looking at a red dot and didn't want to spend $400 on one with solar power. This did not fit my CZ P10C as it's too long but I'm going to give it a try on my Sig. 2 screws to mount it. Easy to adjust with elevation and windage. The dot shows up quickly and is easy to see.

So it looks like I've got to invest in another slide just for this little Apollo. I already have several ADE optics, and the one I intended to replace with this, I just like too much to remove and swap. I'm a sucker for budget optics that have nice features that you pay a whole lot more for on the big names. Shake awake, top load batteries, and extra plates and screws for adaption. The glass is nice and clear, and the dot looks good through it, although it's hard to show that in a photo. I am highly looking forward to the solar charge test for this one, but mostly it will not be exposed to sunlight. Now just to find a home for it...

A great red dot sight for a variety of handguns, including as the Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC, Mossberg MC2SC, and Kimber R7 Mako, is the Ade Advanced Optics RD3-030/APOLLO-PRO. This sight is unique in that its 4 MOA red dot is solar-powered and sensor-activated. It is perfect for a variety of shooting situations since it provides fast and accurate target acquisition. When you need battery power most, the solar-powered feature makes sure you won't run out. Furthermore, the RD3-030/APOLLO-PRO is compatible with a variety of weapons because it is made to accommodate any handgun with an RMS/RMSC screw pattern or footprint.

This fit my Springfield XD easily. The site is bright when needed. It will also dim in low light situations which is a great addition. I also like how it has a solar panel to keep the site running even if the battery runs out. I'm glad I picked this one up, I really like it.

This company ADE is putting out some great products, that at first glance, stack up nicely to their MUCH more expensive competitors. This specific one has the RMS/RMSc footprint and fits my Canik TP9 SC Elite. I currently have an expensive name-branded optic on that pistol that I have hundreds to thousands of rounds through. It has great brightness and optical clarity. Minimal parallax that I could discern. Time will tell if it's able to hold zero on my 9mm platform. The housing is aluminum and sturdy. It claims to have "Solar" charging capabilities... not sure how that works, unless you just leave it out in the sun for a while. But the battery claims to have life to 50,000 hours. That's a long time. So for now, I'm really digging this thing and it will put a lot of pressure on its more expensive competitors if it holds up.

The Ade Advanced Optics RD3-030/APOLLO-PRO Red Dot Sight has left a strong impression on me. I've had the pleasure of using it across several handguns, including the Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC, Mossberg MC2SC, and Kimber R7 Mako. The 4 MOA red dot has significantly improved my accuracy and targeting speed, which is crucial in various shooting scenarios. One of the standout features of this sight is its sensor activation and solar-powered design. This innovative approach ensures that the sight is always ready when I need it, regardless of the lighting conditions. It's as if the RD3-030/APOLLO-PRO anticipates my needs, making my shooting experiences much smoother and more efficient. Installation and adjustment were straightforward, and I found the sight to be remarkably adaptable to my preferences. The clarity and brightness of the red dot have consistently held up, even during extended range sessions. What truly impresses me is how seamlessly it integrates with different handguns, offering improved accuracy across the board. Summing it up, the Ade Advanced Optics RD3-030/APOLLO-PRO Red Dot Sight is a standout accessory for any shooting enthusiast. Its performance, adaptability, and advanced features make it a must-have for those seeking enhanced shooting experiences. Without a doubt, I'd give this product a solid five-star rating for its exceptional quality and game-changing capabilities.

i have always wanted a solar red dot and now that i have one its been amazing to use. was simple to install in my slide and works with the sun so no battery needed unless u need to use at night. its nice and bright and has multiple options

I got the Ade Advanced Optics RD3-030/APOLLO-PRO Sensor Activated, Solar Powered 4 MOA Red Dot Sight for my Glock 43X MOS, and it fits like a glove! It utilizes the RMS/RMSC screw pattern/footprint, so make sure that you get the right sight for your firearm. I wasn't very familiar with the ADE brand, but I can say that it is a quality-built product and I have picked up a few more of their models for various firearms. As mentioned, the materials that are used are good, quality materials and I would say they are a good, solid midrange sight, not something I would necessarily use for competition, but it is one that I use on my range and daily carry. Additional features that the APOLLO PRO includes are "always powered on and it features an auto-dimming sensor based on ambient light and there is no physical on/off/brightness button. The sensor does it all". Overall, the sight is a great sight with clear optics. Even though the sight is made overseas, it is designed in Oregon, USA and the support is US based as well. I can and do recommend the Ade Advanced Optics RD3-030/APOLLO-PRO Sensor Activated, Solar Powered 4 MOA Red Dot Sight!

I really like this optic, even more so for the price. The always on feature is interesting, but a very welcome feature. The company states 50,000 hours of use on the battery, assuming when it is on its lowest setting, but even so, it must get quite a few hours even on its highest. For reference, because It was put on a Glock48 non MOS, I took it to a gunsmith to install it. ADE also makes an optic plate for the Glock 48 Non MOS that utilized the rear dovetail sight. They pushed out the rear sight, installed the plate and installed the optics for me. They just told me to bring it to the range and sight it in at about 20-25 yards. Unlike many other optics that require you to turn them on, this is always ready to go, allowing me to draw and immediately acquire target. The auto dim feature seems to work well and quickly adjusts to the different lighting situation. I tested by turning each room to a different light level and walking through. Each change was smooth and almost immediate. The dot is bright and clear, and adjusting it is fairly easy. I cannot stress enough to make your major adjustments while the mounting screws are loose, and only very small adjustments when tight. I found this out attempting to adjust the dot and not able to get it to move far enough. The directions tell you this, and even warn of permanent damage if you fail to follow it. Luckily, all is well with mine, and I did not damage it. I have not had the opportunity to take it to the range and test it yet and sight it in, but I doubt I will have any issues, if I do I will return to alert everyone reading this.

Easy to attach, accurate, nice quality has weight to it not plastic junk

Just a hair and I mean one tiny strand of hair, too big for my Sig .380. Kept it for another pistol I'm getting. If it doesn't fit that then I'm shelving it for God knows how long. Maybe I'll remember it's sitting up there in fifty years as I lay dying on my deathbed.

Looks pretty good and fits perfect there was no need to adjust in my case