Ade Optics RD3-009 Shake Awake WATERPROOF Compact MINI Crusader Red Dot Reflex Sight Pistol or Rifle and Glock MOS

 ADE RD3-009 Red Dot Sight - 6 MOA, Motion Activated, Shockproof, Waterproof

The ADE RD3-009 Red Dot Sight is engineered for rugged durability and high performance, offering a premium aiming experience for your firearm.

Key Features:

• Fully Shockproof & Fogproof: Built to endure tough conditions, ensuring consistent performance in all environments.

• Motion Activated Technology (Motion Awake): Automatically powers down after 5 minutes of inactivity. It quickly activates when motion or vibration is detected, saving battery life while maintaining readiness.

• 6 MOA Red Dot: Ideal for quick target acquisition with a large, easy-to-see aiming point.

• Waterproof: Rated for 30 minutes of waterproof operation at 1.7 feet depth.

• High-Quality Lenses: Precision-ground and polished lenses eliminate parallax for a crystal-clear sight picture.

• Adjustable Windage & Elevation: Fully adjustable with lockable controls to ensure precise and repeatable adjustments.

• 5 Illumination Settings: Adjustable brightness settings for optimal performance in varying lighting conditions.

Compatibility:

• Footprint: ADE RD3-009 has the Doctor/Vortex Venom type footprint, not compatible with the Springfield HELLCAT OSP (which uses the Shield RMS footprint).

• Direct Fit: The RD3-009 is designed to fit directly onto "Optics Ready" pistols such as:

  • Glock MOS

  • Springfield OSP (non-HELLCAT)

  • Canik TP9 SFX (non-elite SC)

  • Walther PPQ Q5 Match

  • FNX 45 Tactical

  • IWI Masada
    Note: These pistols must be Optics Ready models that come with a mounting plate for DOCTOR/VORTEX VENOM type red dots.

• For Non-Optics Ready Pistols: If your pistol doesn't have a compatible mounting plate, you will need an aftermarket plate to replace the rear sight (not included with this sight purchase). Brands such as ADE, Lakeline LLC, EGW, and Outerimpact offer various mounting plates for specific handguns.

Setup Instructions:

• The RD3-009 comes with a pre-assembled Picatinny mounting plate.

• To install, use the included Allen wrench to remove the 2 hex screws on the top behind the glass frame to disconnect the red dot from the Picatinny plate.

• You can then attach the red dot to various handgun mounting plates (sold separately).

• Screw Compatibility: The included screws are M3x6mm for use with the pre-assembled Picatinny plate. If using an aftermarket mounting plate, you might need longer (M3x8mm) or shorter (M3x4mm) screws depending on the plate thickness. For the right size, visit a local hardware store like ACE Hardware.

Specifications:

• Magnification: 1X (no magnification)

• Sight Window: 25mm x 16mm (.98" x .62")

• Elevation & Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)

• Adjustment Value per Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn

• Subtension of Aiming Dot: 4 MOA (10.5 cm @ 100 m)

• Parallax-Free Sighting Distance: Approximately 50 yards

• Recoil Resistance: Can handle at least 1000 Gs of recoil

• Operating Temperature Range: -10°F to +130°F (-25°C to +55°C)

• Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)

• Power Supply: 3V CR2032 Lithium Battery (included)

Included in the Box:

• Allen wrench for tightening fasteners

• Screwdriver and adjusting disc for setup

• Protective cap for lens protection

• One 3V CR2032 Lithium battery

• Operating instructions

• Weaver/Picatinny-style mount

• Extra rubber sealing ring for battery compartment

Dimensions & Weight:

• Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)

• Weight: 0.9 oz (25 g) without mounting materials